3 Ports FBT WDM Device (Steel Tube)
$100≥100Piece/Pieces
Payment Type: | T/T |
Incoterm: | FOB,EXW |
Min. Order: | 100 Piece/Pieces |
Transportation: | Ocean,Air |
Port: | SHENZHEN,YANTIAN,SHEKOU |
$100≥100Piece/Pieces
Payment Type: | T/T |
Incoterm: | FOB,EXW |
Min. Order: | 100 Piece/Pieces |
Transportation: | Ocean,Air |
Port: | SHENZHEN,YANTIAN,SHEKOU |
Model No.: GL-FBT-ST
Brand: XDK
Species: Cable Assembly Other
Place Of Origin: China
Shield: Not Applicable
Cable Material: Not Applicable
Impedance: Not Applicable
Frequency-Maximum: Not Applicable
Rated Voltage: Not Applicable
Rated Current: Not Applicable
Shield Type: Not Applicable
Antenna Length: Not Applicable
Conductor Type: Not Applicable
Conductor Coating: Not Applicable
Cable Height: Not Applicable
Coil Diameter: Not Applicable
Conductor Diameter: Not Applicable
Thermal Protection: Flame Resistant
Wear Protection: Abrasion Resistant
Liquid Protection: Oil Resistant
Environmental Protection: Weather Resistant, Environment Resistant
Operating Temperature Range (℃): -5~+70
Optical Fiber Type: Corning Smf 28e+ Or Equal(Customized)
Package Dimension (mm): Steel Tube: 3.0x56
Insertion Loss (dB): Max 0.3
Passband Wavelength (nm): 1295~1325
Relection Wavelength(nm): 1535~1565
Optical Fiber Length (m): ≥0.1 (Customized)
Polarization Mode Dispersion (ps): Max 0.1
Isolation (dB): Min 17
Polarization Dependent Loss (dB): Max 0.1
A fusion taper type wavelength division multiplexer, comprising an input end cone, an output end cone, and a coupling area. The input end cone is located at one end of the coupling area, and the output end cone is located at the coupling area. At the other end of the zone, the input end cone includes an input arm and a backscatter arm, the output end cone includes a through arm and a coupling arm, and the optical power is input from the input arm of the input end cone through the The coupling zone is redistributed after coupling and output from the output end cone. A part of the optical power is output from the through arm and the other part is output from the coupling arm. The coupling zone includes two optical fibers, and the cladding parts of the two optical fibers are mutually connected. Close, when pulling the taper, the two optical fibers are pulled in opposite directions but cannot move relative to each other. The two optical fibers are processed by a fusion taper device.
Further, the melting taper device is formed by two insulation bricks made of aluminum oxide fiber insulation material to form a cavity, and the high temperature heat source is provided by an electric heating wire made of molybdenum disilicide material, and the heating wire is located In the heating tank, the heating temperature is adjusted by adjusting the voltage at both ends of the electrodes connected to it, the Optical Fiber passes over the heating wire, and the taper speed is adjusted by changing the rotation speed of the programmable stepping motor driver.
Further, the two optical fibers are fused and tapered in the fusion tapering device, one of which is used as the input power of the input arm, and the other is used as the coupling arm fiber. After the tapering length reaches a certain distance, the two fibers are coupled, and the optical power is Continuously couple into the coupling arm fiber, continue to taper, and the optical power is repeatedly and alternately coupled in the two fibers.
FBT WDM, also known as Fused Biconic Taper WDM and FBT WDM Splitter, along with LAN WDM Splitter, Filter WDM Splitter, Dense Wdm Splitter and Coarse Wdm Splitter, are the most commonly used Wdm Device in construction of PON.
1x2 FBT WDM device is based on the fused biconical taper technology, which can make two optical fiber become fused biconical taper under high temperature, then after packaging it can add or drop the different optical wavelength signal.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.