GL-808GP-1G1SFP
Introduction
To fulfill the demand of High Power PoE for network applications with Gigabit transmission, GL-COM GL-808GP-1G1SFP PoE Gigabit Ethernet Switch is an ideal solution. Each 10/100/1000Mbps port of the GL-808GP-1G1SFP features IEEE 802.3af and IEEE 802.3at Power Over Ethernet (PoE) that combine up to 96/120-watt PoE budget on the whole system, It is designed specifically to satisfy the growing demand of higher power consuming network PD (powered devices) such as PTZ (Pan, Tilt & Zoom) / speed dome network cameras, multi-channel (802.11a/b/g/n) wireless LAN access points and other network devices by doubling Poe Power , more than the current conventional 802.3af PoE.
All RJ45 copper interfaces of the GL-808GP-1G1SFP support 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cables. It also supports standard auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables. 1extra 10/100/100Mbps RJ45 and 1 extra 1.25Gbps SFP slots can be used for uplink.
Poe Switch, also named as Poe Switch Ethernet, is one of the Switch that have Poe Port that can do Poe Power Supply.
Typical applications please refer to following picture
Features
1. Complies with IEEE 802.3, 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T
2. 8-Port 10/100/1000Mbps supports 52V DC power to PoE Powered Device
1- Port 10/100/1000Mbps RJ45 interface for uplink
3. 1 1.25Gbps SFP inte
4. rface for uplink
5. Complies with IEEE 802.3af/802.3at Power over Ethernet End-Span GL
6. Up to 8 IEEE 802.3af devices powered
7. Supports PoE Power up to 15.4 watts for each PoE port
8. Up to 4 IEEE 802.3at devices powered
9. Supports PoE Power up to 30 watts for each PoE port
10. 96/120-watt PoE budget
11. Auto detects powered device (PD)
12. Circuit protection prevents power interference between ports
13. Remote power feeding up to 100m
14. Hardware based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
15. Features Store-and-Forward mode with wire-speed filtering and forwarding rates
16. IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
17. Integrates address look-up engine, supporting 8K absolute MAC addresses
18. 2M packet buffer
19. 10K Jumbo frame supports at 1000Mbps duplex mode
20. IEEE 802.1Q Vlan packet transparency support
21. Automatic address learning and address aging
22. Made of metal, desktop size and wall-mount design
Specification
1. Power Supply Mode: City power
2. Voltage Range: AC 100-240V
3. Power Consumption: The device <5W, POE power supply <96/120W
4. Network Ports: 1～8 Ports, 10/100/1000Mbps Ethernet Port, adaptive control; Uplink 1 SFP, 1.25Gbps and 1 10/100/100Mbps RJ45
5. Transmission Distance: 1~8 Ethernet Port, 0~100m; Mandatory 10 Mbps reach up to 250m; 1 uplink Ethernet Port, 0~100m; 1 SFP, According to different SFP
6. Transmission Media: 1~8 Ethernet Port, Cat5e/6 standard UTP cable; 2 SFP, LC interface Optical Fiber
7. POE Agreement: IEEE802.3 af/at standards
8. PoE Power Supply Mode: End-span method
9. PoE Power Supply Wattage: Each port≤30W, Whole device<96/120W
10. Network Standard: IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, IEEE802.3ab 1000BASE-T
11. Swap Mode: Store-and- forward
12. Switch Capacity: 20Gbps
13. MAC Address List: 8K
14. Power Indicator Light: One power light (green)
15. Optical Fiber Port Indicator: One fiber link indication light (green), Green light keeps on when the fiber port is well connected
16. PoE Indicator: 1~8 PoE indicator light(yellow)
17. PoE Network Port LED: 1~8 port (green light on RJ45 jack) Keeps on when normally connected, Blinking when transceiver data
18. Surge Immunity: Level 3, executive standard: IEC61000-4-5
19. Electrostatic Protection: 1a touch electric discharge: level 3; 1a Air discharge: level 3; Executive standard, IEC61000-4-2
20. Working Temperature: -10℃～55℃
21. Storage Temperature: -40℃-85℃
22. Humidity(non-congeal): 0~95%
23. Dimensions (L*W*H): 202X140X45MM
24. Color: Black
25. Weight: 1kg
26. Mean time between failures (MTBF): ＞50000h
Application
Packaging Detail:
Contact Now
