GL-816GP-2G
What is the working process of a Poe Switch?
Detection: At the beginning, the POE Switch outputs a very small voltage on the port until it detects that the connection of the cable terminal is a power-receiving device that supports the IEEE802.3af standard.
PD device classification: When the PD of the power receiving device is detected, the poe switch may classify the PD device and evaluate the power loss required by the PD device.
Start of Power Supply: During the startup period of a configurable time (generally less than 15μs), the poe switch starts to supply power to the PD device from a low voltage until it provides a 48V DC power supply.
Power supply: Provide a stable and reliable 48V DC power for PD equipment to meet the power consumption of PD equipment that does not exceed 15.4W.
Power failure: If the PD device is disconnected from the network, the poe switch will quickly (usually within 300-400ms) stop powering the PD device, and repeat the detection process to detect whether the terminal of the cable is connected to the PD device.
Poe Switch, also named as Poe Switch Ethernet, is one of the Switch that have Poe Port that can do Poe Power Supply.
Introduction
To fulfill the demand of High Power PoE for network applications with Gigabit transmission, GL-COM GL-816GP-2G PoE Gigabit Ethernet Switch is an ideal solution. Each 10/100/1000Mbps port of the it features IEEE 802.3af and IEEE 802.3at Power Over Ethernet (PoE) that combine up to 260-watt PoE budget on the whole system. All RJ45 copper interfaces of it support 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cables. It also supports standard auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables. 2 extra gigabit RJ45 for uplink.
Typical applications please refer to following picture
Features
1. Complies with IEEE 802.3, 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T
2. 16-Port 10/100/1000Mbps supports 52V DC power to PoE Powered Device
3. 2-Port 10/100/1000Mbps RJ45 interface for uplink
4. Complies with IEEE 802.3af/802.3at Power over Ethernet End-Span GL
5. Up to 16 IEEE 802.3af devices powered
6. Supports Poe Power up to 15.4 watts for each PoE port
7. Up to 8 IEEE 802.3at devices powered
8. Supports PoE Power up to 30 watts for each PoE port
9. 260-watt PoE budget
10. Auto detects powered device (PD)
11. Circuit protection prevents power interference between ports
12. Remote power feeding up to 100m
13. Hardware based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
14. Features Store-and-Forward mode with wire-speed filtering and forwarding rates
15. Integrates address look-up engine, supporting 8K absolute MAC addresses
16. Automatic address learning and address aging
17. Made of metal, desktop size and wall-mount design
Specification
1. Voltage Range: AC 100-240V: AC 100-240V
2. Power Consumption: The device <5W, POE power supply <260W
3. Network Ports: 1～16 Ports, 10/100/1000Mbps Ethernet Port, adaptive control; 2-Port, 10/100/1000Mbps RJ45 interface for uplink
4. Transmission Distance: 1~18 Ethernet Port: 0~100m
5. Transmission Media: 1~18 Ethernet Port: Cat5e/6 standard UTP cable
6. POE Agreement: IEEE802.3 af/at standards
7. PoE Power Supply Mode: End-span method
8. PoE Power Supply Wattage: Each port≤30W, Whole device<260W
9. Network Standard: IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, IEEE802.3ab 1000BASE-T
10. Swap Mode: Store-and- forward
11. Switch Capacity: 36Gbps
12. MAC Address List: 8K
13. Power Indicator Light: One power light (green)
14. PoE Indicator: 1~16 PoE indicator light(yellow)
15. Network Port LED: 1~18 port (green light on RJ45 jack) Keeps on when normally connected, Blinking when transceiver data
16. Surge Immunity: Level 3, executive standard: IEC61000-4-5
17. Electrostatic Protection: 1a touch electric discharge, level 3; 1a Air discharge, level 3; Executive standard, IEC61000-4-2
18. Working Temperature: -10℃～55℃
19. Storage Temperature: -40℃-85℃
20. Humidity(non-congeal): 0~95%
21. Dimensions (L*W*H): 310mm×180mm×44.5mm
22. Color: Black
23. Weight: 3kg
24. Mean time between failures (MTBF): ＞50000h
Application
Packaging Detail
Contact Now
