GL-808GP-2SFP
Introduction
To fulfill the demand of High Power PoE for network applications with Gigabit transmission,GL-COM GL-808GP-2G PoE Gigabit Ethernet Switch is an ideal solution. Each 10/100/1000Mbps port of the GL-808GP-2G features IEEE 802.3af and IEEE 802.3at Power Over Ethernet (PoE) that combine up to 120-watt PoE budget on the whole system.All RJ45 copper interfaces of the GL-808GP-2G support 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ45 Category 6,5 or 5e cables.It also supports standard auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables.2 extra gigabit RJ45 for uplink.Poe Switch,also named as Poe Switch Ethernet,is one of the Switch that have Poe Port that can do Poe Power Supply.Typical applications please refer to following picture
Features
1. Complies with IEEE 802.3, 10BASE-T,IEEE 802.3u 100BASE-TX,IEEE 802.3ab 1000BASE-T
2. 8-Port 10/100/1000Mbps supports 52V DC power to PoE Powered Device
3. 2 1.25Gbps SFP interfaces
4. Complies with IEEE 802.3af/802.3at Power over Ethernet End-Span GL
5. Up to 8 IEEE 802.3af devices powered
6. Supports Poe Power up to 15.4 watts for each PoE port
7. Up to 4 IEEE 802.3at devices powered
8. Supports PoE Power up to 30 watts for each PoE port
9. 120-watt PoE budget
10. Auto detects powered device (PD)
11. Circuit protection prevents power interference between ports
12. Remote power feeding up to 100m
13. Hardware based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
14. Features Store-and-Forward mode with wire-speed filtering and forwarding rates
15. IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
16. Integrates address look-up engine, supporting 8K absolute MAC addresses
17. 2M packet buffer
18. 10K Jumbo frame supports at 1000Mbps duplex mode
19. Automatic address learning and address aging
20. Made of metal, desktop size and wall-mount design
Specification
1. Power Supply Mode: Power Adapter
2. Voltage Range: DC 52V
3. Power Consumption: The device 5W POE power supply 120W
4. Network Ports: 1 8 Ports 10 100 1000Mbps Ethernet Port adaptive control Uplink 2 SFP 1 25Gbps
5. Transmission Distance: 1 8 Ethernet Port 0 100m 2 SFP According to different SFP
6. Transmission Media: 1 8 Ethernet Port Cat5e 6 standard UTP cable 2 SFP LC interface Optical Fiber
7. POE Agreement: IEEE802 3 af at standards
8. PoE Power Supply Mode: End span method
9. PoE Power Supply Wattage: Each port≤30W Whole device 120W
10. Network Standard: IEEE802 3 10BASE T IEEE802 3u 100BASE TX IEEE802 3ab 1000BASE T
11. Swap Mode: Store and forward
12. Switch Capacity: 24Gbps
13. MAC Address List: 8K
14. Power Indicator Light: One power light (green)
15. Optical Fiber Port Indicator: One fiber link indication light (green), Green light keeps on when the fiber port is well connected
16. PoE Indicator: 1~8 PoE indicator light(yellow)
17. Network Port LED: 1~8 port (green light on RJ45 jack) Keeps on when normally connected, Blinking when transceiver data
18. Surge Immunity: Level 3, executive standard: IEC61000-4-5
19. Electrostatic Protection: 1a touch electric discharge, level 3; 1a Air discharge, level 3; Executive standard, IEC61000-4-2
20. Working Temperature: -10℃～55℃
21. Storage Temperature: -40℃-85℃
22. Humidity(non-congeal): 0~95%
23. Dimensions (L*W*H): 202mmx140mmx44mm
24. Color: Black
25. Weight: 1.2kg
Packaging Detail
Contact Now
