To fulfill the demand of High Power PoE for network applications with Gigabit transmission, GL-COM GL-808GP-2G PoE Gigabit Ethernet Switch is an ideal solution. Each 10/100/1000Mbps port of the GL-808GP-2G features IEEE 802.3af and IEEE 802.3at Power Over Ethernet (PoE) that combine up to 120-watt PoE budget on the whole system. All RJ45 copper interfaces of the GL-808GP-2G support 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cables. It also supports standard auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables. 2 extra gigabit RJ45 for uplink.
Poe Switch, also named as Poe Switch Ethernet, is one of the Switch that have Poe Port that can do Poe Power Supply.
Typical applications please refer to following picture
Features
1. Complies with IEEE 802.3, 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T
2. 8-Port 10/100/1000Mbps supports 52V DC power to PoE Powered Device
3. 2-Port 10/100/1000Mbps RJ45 interface for uplink
4. Complies with IEEE 802.3af/802.3at Power over Ethernet End-Span GL
5. Up to 8 IEEE 802.3af devices powered
6. Supports Poe Power up to 15.4 watts for each PoE port
7. Up to 4 IEEE 802.3at devices powered
8. Supports PoE Power up to 30 watts for each PoE port
9. 120-watt PoE budget
10. Auto detects powered device (PD)
11. Circuit protection prevents power interference between ports
12. Remote power feeding up to 100m
13. Hardware based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
14. Features Store-and-Forward mode with wire-speed filtering and forwarding rates
15. IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
Specification
1. Voltage Range: AC 100-240V
2. Power Consumption: The device <5W, POE Power Supply <120W
3. Network Ports: 1～8 Ports: 10/100/1000Mbps Ethernet Port, adaptive control; 2-Port 10/100/1000Mbps RJ45 interface for uplink
4. Transmission Distance: 1~10 Ethernet Port, 0~100m
5. Transmission Media: 1~10 Ethernet Port, Cat5e/6 standard UTP cable
6. POE Agreement: IEEE802.3 af/at standards
7. PoE Power Supply Mode: End-span method
8. PoE Power Supply Wattage: Each port≤30W, Whole device<120W
9. Network Standard: IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, IEEE802.3ab 1000BASE-T
10. Swap Mode: Store-and- forward
11. Switch Capacity: 20Gbps
12. MAC Address List: 8K
13. Power Indicator Light: One power light (green)
14. PoE Indicator: 1~8 PoE indicator light(yellow)
Application
Packaging Detail
Contact Now
