80 Channel 50GHz Flat Type AAWG WDM

Get Latest Price

Payment Type:	T/T
Incoterm:	FOB,EXW
Transportation:	Ocean,Land,Air,Express
Port:	SHENZHEN,YANTIAN,SHEKOU

Supply Type:

Original Manufacturer

Option:

Non-Adjacent, Channel Isolation (dB): Minimum
Return Loss (dB) (with conn.): Minimum 40
PDL (dB): Maximum 0.50
PDM (ps): Maximum 0.50
Maximum Optical Power (mW): 300
Operating Temperature Range (℃): -40~85
Storage Temperature Range (℃): -40~85
Fiber Type: Corning SMF 28e+ or equal（or cust
Fiber Length (m): ≥1.0（or customized）
Package dimension (mm) Max: 150x70x12 or cust

Contact Now

Product Description

Product Attributes

Packaging & Delivery

Product Description

Product Attributes

Model No.: GL-AAWG-F2

Brand: XDK

Species: Cable Assembly Other

Place Of Origin: China

Shield: Not Applicable

Cable Material: Not Applicable

Impedance: Not Applicable

Frequency-Maximum: Not Applicable

Rated Voltage: Not Applicable

Rated Current: Not Applicable

Shield Type: Not Applicable

Antenna Length: Not Applicable

Conductor Type: Not Applicable

Conductor Coating: Not Applicable

Cable Height: Not Applicable

Coil Diameter: Not Applicable

Conductor Diameter: Not Applicable

Thermal Protection: Flame Resistant, Not Applicable

Wear Protection: Abrasion Resistant, Not Applicable

Liquid Protection: Oil Resistant, Not Applicable

Environmental Protection: Weather Resistant, Environment Resistant, Not Applicable

Numbers Of Channel: 40

Pass Band Wavelength (nm): Itu Standard

Offset Of Central Wavelength (nm): ±0.05

Spacing (GHz): 100

1 DB Bandwidth (nm): 0.22

3 DB Bandwidth (nm): 0.42

Insertion Loss (dB): Maximum 3.5

Flatness (dB): Maximum 1.5

Uniformity (dB) @ITU CW: Maximum 1.3

Adjacent Channel Isolation (dB): Minimum 27

Packaging & Delivery

Selling Units	:	Piece/Pieces
Package Type	:	100pcs in one carton
Picture Example	:
Download	:

Product Description

80 Channel 50GHz Flat Type AAWG WDM

What are the common WDM devices?

1. Optical Fiber fusion taper Wdm Device
The optical fiber fusion taper device draws multiple optical fibers into a tapered shape under thermal fusion conditions, and slightly twists them to fuse them together, through the evanescent wave coupling in the tapered area to reach the coupling optical power required by their respective wavelengths. This kind of device does not need a wavelength selective device, is very simple, and is easy to mass produce. Its biggest advantage is low insertion loss, up to 0.05dB. In addition, it also has a good optical channel bandwidth/channel spacing ratio and temperature stability, can get a higher isolation ratio, and the manufacturing cost is relatively low. The disadvantage is that the size is slightly larger and the number of wavelength division multiplexing channels is less (less than 10).
2. Thin film filter type WDM device
Thin-film filter-type devices are usually composed of ten or twenty layers of dielectric films of different materials, refractive indexes and thicknesses according to the design requirements, and achieve the synthesis and separation of different wavelengths by forming passbands and stop bands for different wavelengths. The advantages of this device are compact structure, almost independent of fiber parameters, flat signal passband, low insertion loss, up to 0.4dB. The disadvantage is that the design and manufacture are more troublesome, the output is lower, and the price is higher than that of the melt cone type device.

Athermal AWG WDM, also known as Athermal Arrayed Waveguide Grating WDM and AAWG WDM Splitter, along with FBT WDM Splitter, LAN WDM Splitter, Filter WDM Splitter, Dense Wdm Splitter and Coarse Wdm Splitter, are the most commonly used WDM device in construction of PON.

40ch Gaussian 1 Y

Product Information:

AAWG flat type no-heat module, which is based on Silicon Plc optical grating technology, is dense wavelength division multiplexing, using athermal configuration, no need to control the temperature of chip, with low insertion loss, high capacity, stable reliability.

40ch Gaussian 2 Y